Portable rechargeable nail drill machine 35W
Please sign in so that we can notify you about a reply
Battery-powered nail polisher with digital display. A set of cutters and a charging cable are included with the nail polisher.
Maintenance and cleaning of the nail polisher motor: Regular cleaning and maintenance are also important for polishers, especially if they are subjected to heavy use (daily use). Its maintenance is simple and only takes a few minutes. The back part of the sander can be easily rolled off, to clean the accumulated dust from the motor part. The openings on the handheld unit must also be blown through with a compressed air spray. The manual part does not need to be oiled! When you are done with these steps, wind up the sander.
Interim maintenance (chuck clamping part): This interim maintenance can only be carried out by a competent service specialist, during such interim maintenance the front part of the machine with the chuck is disassembled, and the rotating and wearing parts in it will be replaced, which wear out as a result of use, and then you can repeat then use the machine.
Only use straight sanding burs in the machine, do not use curved burs, as they will destroy your artificial nail sanding machine. Grinding burs with bent shanks cannot be inserted or removed easily from the machine's chuck (they are tight, pinched), and they "hit" during rotation. Do not use such cutters anymore, they must be replaced.
If you neglect the maintenance, the machine will indicate the problem with a screeching sound and heating up, and it may suffer permanent damage later.
The warranty is not valid for defects resulting from neglect of maintenance, as well as rotating and wearing parts.
manual unit power: 35w
weight of manual unit: 170g
size: 124x150x75mm
max speed: 30000rpm
foot pedal: none
rotation direction change: yes (right/left)
quick chuck: yes
battery operation
Warranty period: 12 months
Maintenance and cleaning of the nail polisher motor: Regular cleaning and maintenance are also important for polishers, especially if they are subjected to heavy use (daily use). Its maintenance is simple and only takes a few minutes. The back part of the sander can be easily rolled off, to clean the accumulated dust from the motor part. The openings on the handheld unit must also be blown through with a compressed air spray. The manual part does not need to be oiled! When you are done with these steps, wind up the sander.
Interim maintenance (chuck clamping part): This interim maintenance can only be carried out by a competent service specialist, during such interim maintenance the front part of the machine with the chuck is disassembled, and the rotating and wearing parts in it will be replaced, which wear out as a result of use, and then you can repeat then use the machine.
Only use straight sanding burs in the machine, do not use curved burs, as they will destroy your artificial nail sanding machine. Grinding burs with bent shanks cannot be inserted or removed easily from the machine's chuck (they are tight, pinched), and they "hit" during rotation. Do not use such cutters anymore, they must be replaced.
If you neglect the maintenance, the machine will indicate the problem with a screeching sound and heating up, and it may suffer permanent damage later.
The warranty is not valid for defects resulting from neglect of maintenance, as well as rotating and wearing parts.
manual unit power: 35w
weight of manual unit: 170g
size: 124x150x75mm
max speed: 30000rpm
foot pedal: none
rotation direction change: yes (right/left)
quick chuck: yes
battery operation
Warranty period: 12 months
